What is EME?
EME is a method of radio communication which uses the moon as a passive reflector. Think about if you and your friend were in the desert at night standing on opposite sides of a 10 foot long wall. A mile away, there is a small piece of white paper. If each of you has a telescope and a laser pointer, you could communicate by looking through the telescope at the piece of paper and seeing the reflection of the friend’s laser pointer blink on and off. This is essentially the idea behind moonbounce, or EME.
Due to the curvature of the earth and the fact that long-distance radio propagation conditions are constantly changing, it is not always possible to make contact with a station beyond the horizon. However, using the moon as a giant reflector means that with (very high-gain) antennas, we can use the moon to increase the range of our radio station, regardless of atmospheric conditions.
EME was first practically demonstrated in the 1940s, and since then, many radio amateurs have constructed their own stations to experiment with this remarkable phenomenon. In 2024, W4ATC constructed and installed a 2.4 meter wide dish, and set up the station for moonbounce capabilities. Modern signal processing methods and digital radio modes allow for successful EME contacts even with highly compromised equipment, and the station can detect signals as low as 24 dB below the noise floor.
EME Chess
In 2026, a member had the idea of making a graphical interface that would allow two amateur radio stations to use existing digital moonbounce modes to play a game of chess by bouncing their moves off the moon. A moonbounce station, Python 3 or newer, and the file found here are all that is needed to use this mode.
